SECTION 10440

DOOR AND ROOM SIGNS
				
	[[Delete sign type articles that do not apply]]
NOTE ** This section is based on products manufactured by Scott 
Sign Systems, Inc., at the following address:
NOTE **      7524 Commerce Place
NOTE **      Sarasota, FL 34243-5020
NOTE **      Telephone 941-355-5171, FAX 941-351-1787
NOTE **      Toll Free Telephone 800-237-9447
NOTE ** Scott Sign Systems offers a complete line of letters, 
logos and architectural sign systems.
NOTE ** 
NOTE ** SECTION 10445 - DOOR AND ROOM SIGNS, Copyright 1998

PART 1	GENERAL

1.01	SECTION INCLUDES

A.	Door Signs.

B.	Room Signs.

C.	Dimensional Letters and Numbers.

1.02	REFERENCES

A.	ADAAG - Americans with Disabilities Act Accessibility 
Guidelines; U.S. Architectural and Transportation Barriers 
Compliance Board.
B.	Department of Justice - 28 CFR Part 35 Nondiscrimination 
on the Basis of Disability In State and Local Government 
Services; Final Rule: published Federal Register / Vol. 
56, No. 144 / Friday, July 20, 1991. ̉This rule implements 
subtitle A of title II of the Americans with Disabilities 
Act, Public Law 101-336, ... ... [ADA]

1.03	SUBMITTALS

A.	Submit under provisions of Section 01300.

B.	Product Data:  Manufacturer's descriptive literature for 
sign types specified, including components and 
accessories.

C.	Shop Drawings:  Indicate location of each individual sign 
in the project.
NOTE ** Delete the following paragraph if specifying colors in 
this section. 

D.	Verification Samples:  One full size sample sign of type, 
style and color specified, including method of attachment.

E.	Manufacturer's instructions:  Printed installation 
instructions for each product.

1.04	QUALITY ASSURANCE

A.	Regulatory Requirements:  Sign types to comply with ADAAG 
requirements, The Americans with Disabilities Act - 
1990(ADA) and ANSI A117.1 - 1992.

1.05	DELIVERY, STORAGE, AND HANDLING

A.	Store products of this section in manufacturer's unopened 
packaging until installation.

B.	Maintain dry, climate controlled storage area for products 
of this section until installation of products.


PART 2	PRODUCTS

2.01	MANUFACTURERS

A.	Acceptable Manufacturer:  Scott Sign Systems, Inc. 7524 
Commerce Place Sarasota, FL 34243 Toll Free Telephone: 
800-237-9447 Telephone: (941) 355-5171 24 HR Fax: (941) 
351-1787.
NOTE ** Delete one of the two following paragraphs; coordinate 
with Division 01 requirements. 

B.	Requests for substitutions will be considered in 
accordance with provisions of Section 01600.

C.	Substitutions:  Approved equal must submit their signage 
products to the Architect 10 days prior to the bid date 
for approval to be considered as an equal.
NOTE ** Delete following paragraph if substitutions not permitted. 

D.	Unless otherwise specified for an individual product or 
material, supply all products specified in this section 
from the same manufacturer.

2.02	MANUFACTURED UNITS 

NOTE ** Delete paragraphs specifying products not required; 
consult manufacturer's catalog for available options and insert in 
paragraph.
NOTE ** 
NOTE ** If not selecting colors at time of issue of Project 
Manual, retain sub-paragraph deferring color selection and 
coordinate with requirements for Samples in SUBMITTALS Article of 
PART 1; if specifying more than one color or size, retain sub-
paragraph which refers to SCHEDULES Article. 


A.	Injection Molded Signs:
1.	Acceptable product:  Scott-ADA Molded Acrylic Plaques
2.	Colors:  Face color: Black, White, Almond, Gray, Clear 
non-glare painted __________; graphics and letter 
color ________.
3.	Colors:  Selected by Architect from manufacturer's 
full range of available colors.
4.	Colors:  Specified in SCHEDULES Article of this 
section.
5.	Sign size:  3 inches by 6 inches.
6.	Sign size:  6 inches by 6 inches.
7.	Sign size:  8 inches by 6 inches.
8.	Sign sizes:  Specified in SCHEDULES Article of this 
section.
9.	Corners: Square
10.	Graphics:  International symbols for indicated 
information.
11.	Lettering:  Minimum 5/8 inch high integral copy, 
raised 1/32 inch, with Grade 2 Braille coding.
12.	Lettering Style: Scott HM
13.	Sign frames:  None
14.	Installation method: VHB, Holes Drilled, Specify



PART 3	EXECUTION

3.01	EXAMINATION

A.	Verify that surfaces to receive signs have been finished, 
and that finishes are dry and correctly cured.

3.02	INSTALLATION

A.	Install room and door signs in accordance with 
manufacturer's printed installation instructions.

B.	Locate signs in accordance with approved shop drawings and 
ADA requirements.
NOTE ** The following Article will assist in preparing a door and 
room sign schedule for the project. 

3.03	SCHEDULES

		[[Indicate Sign Schedule as it applies]]

A.	Sign Schedule:
1.	First Floor:
	a.	Sign Type: Specify
	b.	Background Color: Specify
	c.	Letter Style: Specify
	d. 	Letter Color: Specify
	1.	Room 101:  Legend "WAITING ROOM"; size 8 
	inches by 8 inches.
	2.	Door 121:  Legend "AUTHORIZED PERSONNEL 
	ONLY"; size 2 inches high by 12 inches long.

	END OF SECTION